Team Introduction

Wu Huibin    professor, doctoral supervisor

Huibin Wu, Collaborative Innovation Center of Steel Technology, professor, doctoral supervisor. Received his bachelor’s degree of materials science and engineering, Hebei University of Technology in 2000, and received his doctor’s degree from school of ma

Huibin Wu, Collaborative Innovation Center of Steel Technology, professor, doctoral supervisor. Received his bachelor’s degree of materials science and engineering, Hebei University of Technology in 2000, and received his doctor’s degree from school of materials science and engineering, University of Science & Technology Beijing in 2006. He was a visiting scholar at the school of engineering, Wayne State University, USA, 2013-2014. At present, he is mainly engaged in research on advanced processing technologies of materials, research and development of high quality steel structural materials, and microstructure control technology of corrosion/wear resistance/low temperature service materials. He has undertaken 15 national and provincial research projects and more than 50 school-enterprise cooperation projects. He has published more than 120 academic papers, edited 2 monographs.

1. National key research and development program, Production technology of CO2 drive corrosion resistant petroleum pipe (2017YFB0304905), 2017-2021

2. National key research and development program, Microstructure evolution and key manufacturing techniques of nickel - free LNG steel (2017YFB0305003), 2017-2021

3. National Natural Science Fund, Effect of predeformation-pretransition on the formation and thermal stability of nano-bainite, 2018-2021

4. School-enterprise cooperation project, Research and development of corrosion resistant high strength steel in complex medium coupling environment in coal mine, (2019-0315), 2019-2021

5. School-enterprise cooperation project, Research and development of die steel P20 rolling plate, (2019-0030), 2019-2020

6. School-enterprise cooperation project, Research and development of ultra-high strength marine steel plate, (2019-0199), 2019-2021

7. School-enterprise cooperation project, Residual stress detection and analysis of green high quality wear-resistant steel plate with short quenching and straightening process, (2018-502), 2018-2020

8. School-enterprise cooperation project, Research and development of key technology of wear-resistant steel with micron TiC particle enhancement, (2017-645), 2017-2020

【Publications】

1. Gang Niu, Qibo Tang, Huibin Wu*, Na Gong, Yanjun Yin, Di Tang. Achieving high strength and high ductility of austenitic steel by cold rolling and reverse annealing[J].Materialia,2019,6,100264.

2. Gang Niu, Qibo Tang, Hatem S. Zurob, Huibin Wu*, Lixiong Xu, Na Gong. Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains[J]. Materials Science & Engineering A, 2019,759, 1–10

3. Lixiong Xu, Huibin Wu*, Yinli Chen. Interpretation of the abnormal high-temperature flow behavior of Fe-Mn-Al duplex lightweight steel[J].Materials Science and Engineering Conference Series,2018,418,012006.

4. Lixiong Xu, Huibin Wu*, Qibo Tang. Effects of Coiling Temperature on Microstructure and Precipitation Behavior in Nb–Ti Microalloyed Steels[J].ISIJ International,2018,58(6),1086-1093.

5. Lixiong Xu, Huibin Wu*, Baosheng Xie. An improved constitutive model for high-temperature flow behaviour of the Fe–Mn–Al duplex steel[J]. Materials Science and Technology,2018,34(2),229-241.

6. Chen Dong, Huibin Wu*, Xitao Wang. Effect of tempering temperatures on microstructures and properties of 0.28C–0.22Ti wear-resistant steel[J]. Materials Science and Technology,2018,34(1),86-94.

7. Gang Niu, Huibin Wu*, Da Zhang, Na Gong, Di Tang. Heterogeneous nano/ultrafine-grained medium Mn austenitic stainless steel with high strength and ductility[J]. Materials Science & Engineering A,2018,725,187-195

8. Lixiong Xu, Huibin Wu*, Xintian Wang. Influence of Microstructural Evolution on the Hot Deformation Behavior of an Fe–Mn–Al Duplex Lightweight Steel[J]. Acta Metall. Sin. (Engl. Lett.), 2018, 31, 389-400.

9. Lixiong Xu, Huibin Wu*. Microstructural evolution and mechanical property optimization under solution treatment of an ultra-low carbon Fe-Mn-Al duplex steel[J]. Materials Science & Engineering A,2018,738,163-173.

10. Huibin Wu, Tao Wu, Gang Niu, Tao Li, Ruiyan Sun, Yang Gu. Effect of the frequency of high-angle grain boundaries on the corrosion performance of 5wt%Cr steel in a CO2 aqueous environment[J]. International Journal of Minerals, Metallurgy and Materials,2018,25(3),315.

11. Na Gong, Huibin Wu*, Gang Niu, Da Zhang. Effects of annealing temperature on nano/ultrafine-grained structure in austenite stainless steel[J]. Materials Science and Technology,2017,33(14),1667-1672.

12. Gang Niu, Huibin Wu*, Na Gong, Da Zhang, Di Tang. Study on Microstructure and Properties of Bimodal Structured Ultrafine-Grained Ferrite Steel[J].Metals,2017,7,316.

13. Na Gong, Huibin Wu*, Zhichen Yu, Gang Niu, Da Zhang. Studying Mechanical Properties and Micro Deformation of Ultrafine-Grained Structures in Austenitic Stainless Steel[J]. Metals,2017,7,188.

14. Huibin Wu, Gang Niu, Jiaming Cao, Yang Gu. Annealing of strain-induced martensite to obtain micro/nanometre grains in austenitic stainless[J]. Materials Science and Technology,2017,33(4),479-486.

15. Gang Niu, Huibin Wu*, Na Gong, Da Zhang. Hybrid nanostructure stainless steel with super-high strength and toughness[J]. Procedia Engineering,2017,207,1791-1796.

16. Huibin Wu, Gang Niu, Fengjuan Wu, Di Tang. Reverse-transformation austenite structure control with micro/nanometer size[J]. International Journal of Minerals, Metallurgy and Materials,2017,24(5),530.

17. Huibin Wu, Di Wang, Pengcheng Zhang, Jinming Liang, Sheng Liu, Di Tang. Influences of Alloying Elementson Oxidation Behavior of Steels and Microstructure of Oxide Scales[J].Journal of Iron and Steel Research,International,2016,23(3),48-54.

18. Biao Ju, Huibin Wu, Di Tang, Ning Dang. Characterization of (Nb,Ti,Mo)C Precipitates in an Ultrahigh Strength Martensitic Steel[J]. Journal of Iron and Steel Research,International,2016,23(5),495-500.

19. Gang Niu, Yinli Chen, Huibin Wu, Xuan Wang, Maofang Zou, Zhijun Xu. Effects of Chromium, Vanadium and Austenite Deformation on Transformation Behaviors of High-strength Spring Steels[J].Journal of Iron and Steel Research,International,2016,23(12),1323-1332.

20. Huibin Wu, Biao Ju, Di Tang, Rirong Hu, Aimin Guo, Qiang Kang, Di Wang.  Effect of Nb addition on the microstructure and mechanical properties of an 1800 MPa ultrahigh strength steel[J]. Materials Science & Engineering A ,2015,622,61-66.